Mighty Mule Automatic Gate Opener SystemFOR DUAL SWING GATES Manual de instalación descargar pdf (Pagina 13)

rev 05.7.13 Rodeo Gear Medium Duty Dual Gate Opener Installation Manual 3

2. Check Direction of Gate Swing

The Rodeo Gear is designed for PULL-TO-OPEN installations. PUSH-TO-OPEN installations require two Push-To-Open

brackets [FM148]. Push-to-Open Installation Instructions begin on page 19.

3. Prepare the Gates

 • Gatesmustbeplumb,level,andswingfreelyontheirhinges.

 • WheelsmustNOT be attached to the gates.

 • Thegatesmustmovethroughouttheirarcswithout binding or dragging on the ground.

 • Notethatgatesover 250 lb. should have ball bearing hinges with grease ﬁttings.

 • Thegatepostshouldbebesecuredinthegroundwithconcretesoitwillminimizetwistorexwhentheopener

is activated.

 • Theadditionofahorizontal or vertical cross member (if one is not already in place) to provide a stable area

for mounting the gate bracket is also important.

 • TrenchthedrivewayinordertolayPVCconduitforthesecondopenerpowercable(seeillustrationonpage6).

Your Property Your Property

Pull-To-Open

(arm retracts to open)

Push-To-Open

(arm extends to open)

Horizontal Cross Member

Vertical Cross Member

A – Level D – Posts Secured in Concrete

B – Plumb E – Centerline Mounting

C – Free Swinging F – Good Working Hinges

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sin comentarios

Mighty Mule Automatic Gate Opener SystemFOR DUAL SWING GATES Manual de instalación Pagina 13